Y Type filter

Product Usage

The Y-type filter is an indispensable filter device for the pipeline system that conveys the medium. It is

usually installed at the inlet end of a pressure reducing valve, pressure relief valve or other equipment to

remove impurities in the medium to protect other pipe fittings or valves from damage from debris and

impurities in the system. The applicable medium can be water, steam, gas, etc.

The Y-type filter has the characteristics of simple structure, small flow resistance, and it can remove dirt

online without removing it. The water quality after the Y-type filter treatment not only meets the national

discharge standards, but also achieves the purpose of repeated and recycled water, so that the precious

water resources are effectively reused and a lot of water resources are saved.

Flange End :ANSI150LB/GB Standard /BS Standard;

Steam Material :2CR13 /Stainless Steel;

Bonnet Material :Ductile Iron ,QT450;

Body Material :Ductile Iron ,QT450;

Seal Material :Ductile Iron ,QT450,NBR

Surface Finishing :Epoxy Red or Blue

Working Pressure :10/16 Bar

size		50	65	80	100	125	150	200	250	300	350	400	450	500
GL41H Length mm		180	192	237	270	301	342	412	538	606	665	765	800	850
testing pressure mpa	body	1.5-2.4
testing pressure mpa	sealing	1.1-1.76
rate working pressure mpa		1.0-1.6
temperature		1-80°C
media		water and weak corrosive fluids